Inserting Machine
Bare Board tester
Axial Component Inse
Jumper Wire Inserter
Axial Component Sequ
Soldering Machine
Reflow Oven
Fiber Optic Products
Integrated Cabling S
Network Equipment
Spare parts & Chemic
1. Complies with IEEE802.3 and IEEE802.3u standards
2. Twenty-four ports for 100Base-TX and 10Base-T connectivity
3. Supports Nway protocol for speed(10/100Mbps)and duplex mode(Half.Full)detection
4. One uplink port, for cascading switch to switch or switch-to-hub with no crossover cable
5. 19" standard rack-mount design
6. Supports full and duplex operation on all ports
7. Support port-trunking and vLAN function
8. Operates at maximum packet filtering and forwarding rate
9. Store-and-forward architecture filters fragment & CRC error packets
10 3Mbytes buffer memory
11. Supports extensive LED indicators and status button for network diagnostics
12. Internal universal switching power supply(100-240VAC, 50/60Hz)
13. FCC Class A, CE, EMI, EMS
(Fast Ethernet 10/100 24port vLAN Switch, LGN-1124)

This device is a powerful, high-performance Fast Ethernet switching hub. With all 24 port capable of 10 or 100Mbps auto-negotiation operation (Nway) which means the switch could automatically negotiate with the connected partners on the network speed and duplex.

It is ideal for micro-segmenting large networks into smaller and connected subnets for improving the performance of the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to 100Mbps networks with no pain. With port trunking and vLAN enhances features, users could build up 800Mbps fat pipe between switch and switch connection that will boost the backbone bandwidth and get rid of network looping issue. The vLAN function could separate the network traffic into groups that could provide more network security and prevent the broadcast packet impact the network performance.

The switch supports the rich diagnostic LEDs and two status button on the front-panel for providing the operating ststus and configuration of individual port and whole system. Moreover, the RS232 console port could be used to configure the switch status easily . Plug and play is the most important concept of the system design, users just need to plug the cable and turn on the power then the system could work under all kinds of network protocols.

STANDARD IEEE802.3 and IEEE802.3u standards
INTERFACE Twenty-four 10/100Mbps RJ-45 NWAY ports
Nway protocol Support Network speed 10Mbps and 100Mbps
Duplex mode Full and Half
Enhanced features Port-trunking and virtual LAN(vLAN)
Uplink port suport An uplink port is used for switch-to-hub or switch-to-switch connection with no crossover cable
Buffer Memory 3Mbyte for the whole system
Filtering/Forwarding Rate 10Mbps 14,880pps/14880pps
100Mbps 148,800pps/148,800pps
Emission FCC Class A, CE
Rich LED indicators System power
Port Link/Activity, FDX/COL, and Speed
Status buttons Two status buttons support port-trunking and vLAN status review
Operating Humidity 10% - 90%(non condensing)
Dimension 445 x 195 x 42 mm
Power Supply 100-240VAC, 50/60Hz
Prev Next